Heat Alarm – 10yr Lithium Battery and RadioLINK Module – EIB603TYCRF

$179.00

10 YEAR LITHIUM CELL POWERED

  • Practically eliminates nuisance alarms
  • Suitable for Kitchens & areas where smoke alarms may be subjected to nuisance alarms
  • RadioLINK Interconnectivity – one alarm sounds all alarms in system
  • Aesthetically pleasing, compact design
  • Large Easy to use Test button
  • Easy to fit twist-on base
Category:
  • Description
  • Additional information
  • Technical details
  • Operation

Description

The Heat Alarm is activated by heat from a fire, not smoke, which makes it ideal for kitchen installations where smoke detectors are prone to nuisance alarms.

The Heat Alarm has a 10 Year Lithium battery that is non replaceable.

This product comes with a 5 year warranty.

The Heat Alarm is interconnected to other smoke / heat alarms in the dwelling or escape routes to ensure that all occupants are alerted to the danger.

Up to 12 battery powered smoke and heat alarms may be linked using hardwire or RF connectivity.

RadioLINK enabled smoke and/or heat alarms can be house coded as a system to prevent communication with other nearby RadioLINK systems.

Additional information

Weight .2 kg

Sensor: Fast response thermistor (class A1) with threshold set to 58oC

Button Test: Pressing the test button tests the sensor, electronics and horn

Battery Voltage: 9V supplied by 10 Year Lithium Battery with 2,000mAh capacity

Power-On Indicator: Red LED flashes through cover every 40 seconds

Alarm Indicator: Red LED flashes rapidly on the alarm sensing the fire and the sounder is activated. The sounders on all interconnected alarms are also activated

Alarm: Piezoelectric-horn

Alarm Sound Output: 85dB (A) (minimum) @ 3m

Normal Operating Temperature Range: 0 to 40C

Humidity Range: 15% to 95% Relative Humidity (non-condensing)

Hardwire Interconnect: Interconnect up to12 alarms and remote control devices

RadioLINK Interconnect: Interconnect for up to 12 battery powered RadioLINK alarms and remote control devices

Fixing: Screw fixings supplied

Dimensions: 115mm (diameter) x 55mm (height)

Warranty: 5 year (limited) warranty

Compliance:

  • Certified to AS1603.3
  • Kitemarked to BS 5446-2:2003
  • CE approved
  • Manufactured to ISO 9001:2000
    quality standards
  • Certified to AS/NZS 4268:2003

The heat detector will alarm when the temperature reaches 580C. It will automatically reset and silence the alarm when the temperature drops below this limit.

The red indicating LED will flash once every 40 seconds to show that the alarm is powered and it has performed an automatic power supply test.

The built in sounder will provide a minimum sound output of 85dB(A) @ 3m.

Pressing and holding the “Test” button will check the sensor, electronics and sound the horn.

The alarm is not powered until it is twisted on the mounting base, thus avoiding battery power consumption during storage and prior to installation.

The heat alarms and other RadioLINK smoke alarms must be house coded. This will avoid interference and interconnection with other RadioLINK systems.

Keep all doors closed to rooms with heat alarms at night and while premises are unoccupied.